Serial A-to-D converters to DSPs Interfacing Methods
By Rend at 25 February, 2010, 5:11 pm
This analog applications journal presents about a methodology of interfacing serial A-to-D converters to DSPs. The theory about serial analog-to digital converters, standard serial interface, serial port general operation are presented in detail after introduction. The main topic is divided into 9 sections :
- Introduction
- Serial analog-to-digital converters
- Standard serial interface
- Serial port general operation
- Serial port configuration
- Transmit and receive operations in burst mode
- Interfacing to sequential ADCs
- Interfacing to “on-the-fly” ADCs
- C-callable interface routines
The detail about serial analog-to-digital converters is presented in section serial analog-to-digital converters. The section standard serial interface describes about interface of standard serial. Serial port general operation and its configuration are presented in detail under section serial port general operation and serial port configuration. The section transmit and receive operations in burst mode presents how the operation of transmit and receive work in burs mode. Interfacing to sequential ADCs and “on-the fly” ADCs are described in detail in section interfacing to sequential ADCs and Interfacing to “on-the-fly” ADCs. C-callable interface routines section describes about C-callable interface routines.
Download/view the application note.
No comments yet.